Pro Junk Dispatch

Plastic, Special Order 

Size
W
H
Material
  • Acrylic DIGITAL, White, 1/8"
  • Acrylic P95, Frosted Clear, 1/4"
  • Acrylic P95, Frosted Clear, 1/8"
  • Acrylic P95, Frosted Clear, 3/8"
  • Acrylic, Black, 1/8"
  • Acrylic, Clear, 1"
  • Acrylic, Clear, 1/2"
  • Acrylic, Clear, 3/8"
  • Komatex, 13mm Black
  • Komatex, 13mm White
  • Komatex, 25mm (1.00 Inch) White
  • Komatex, 3MM White
  • Palight, 3MM Black
  • Palight, 3MM White
  • Polycarbonate .118 White
  • Polycarbonate, .060, Clear (1/16th)
  • Polycarbonate, Clear .118
  • Polycarbonate, clear, .236
  • Polycarbonate, Clear, .375"
  • Polycarbonate, White .177
  • Polycarbonate, White, .25
  • Sintra, 19mm, White
  • Sintra, 1MM White
  • SINTRA, 25mm Black
  • Sintra, 2mm, white
  • Sintra, 3MM White
  • Styrene, .020 White
  • Styrene, .020, Translucent
  • Styrene, .030 White
  • Styrene, .030, Clear
  • Styrene, .040 White
  • Styrene, .060 White
  • Styrene, .060 White 60"x120"
  • Styrene, .090 White
Printed Sides
  • 1 Sided
  • 2 Sided
Clear SAV/mount:
  • First Surface Print, 2nd Surface Mount
  • First Surface Print, First Surface Mount
  • Second Surface Print, Second Surface Mount
Custom Ink:
  • 3 Layer Day / Night Backlit
    If the intent is to create a print that will be lit at night without looking oversaturated during daylight hours, a good solution is a three-layer “day/night” backlit file. A day/night backlit prints an image with a middle layer of flood white and, then, the same image on the other two layers. The benefits are that it prints the three layers at the same time in perfect registration, and the middle white layer allows it to look like a normal image during the day and gives it enough density to light it up for nighttime viewing.
  • Flood White Ink
    After the image is reverse printed with CMYK, the entire background of the graphics will be covered with White Ink, including clear areas.
  • Second Surface
    On clear substrate, the image is first reversed, ink is printed on the back side of the material in CMYK and will result in a translucent colored graphic. The image will be correct orientation when viewing from the front.
  • Spot White Ink
    Spot white keeps portions of your design opaque and helps your colors maintain vibrancy. Without that layer of white underneath the colors will be transparent.
  • Three Layer
    If the intent is to create a print on clear material for double sided viewing. We will print an image with a middle layer of white and, then, the same image on the top layer.
  • Two Layer Ink, 2nd Surface
    On clear substrate, the image is first reversed, ink is printed on the back side of the material, CMYK first, followed by white ink for opacity. The image will be correct orientation when viewing from the front.
Die-Cut:
Flat Sheet:
Mount/print:
Velcro:
  • Velcro 1" black (complete set)
    This option includes both the rough (hook) side and the soft (loop) side of velcro.
  • Velcro 1" black hook (male only)
  • Velcro 1" black loop (female only)
  • Velcro 1" white (complete set)
    This option includes both the rough (hook) side and the soft (loop) side of velcro.
  • Velcro 1" white hook (male only)
  • Velcro 1" white loop (female only)
Quantity

Plastic sheets are durable and work well for both indoor and outdoor use. Plastic signs can be printed on both sides, and cut to nearly any custom shape/size.

STAY CONNECTED

Subscribe to our email list to be the first to know about new offers and the latest deals.